Dear Sir/Madam

I’ve spent nearly on week to figure out how to configure my USB modem to start surfing on internet.Obviously i don’t know what i’m doing so i need some help.I’m using MANDRIVA2010-i586
I’m getting an error when trying to connect internet using wvdial.
Now when i enter this command

[root@localhost ~]# wvdialconf create

i get a long output like

Scanning your serial ports for a modem.

Modem Port Scan: Scanning ttyS1 first, /dev/modem is a link to it.

Modem Port Scan: S1

ttyS0: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud

ttyS0: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud

ttyS0: ATQ0 V1 E1 — and failed too at 115200, giving up.

Modem Port Scan: S2 S3

WvModem: Cannot get information for serial port.

ttyACM0: ATQ0 V1 E1 — OK

ttyACM0: ATQ0 V1 E1 Z — OK

ttyACM0: ATQ0 V1 E1 S0=0 — OK

ttyACM0: ATQ0 V1 E1 S0=0 &C1 — OK

ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK

ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK

ttyACM0: Modem Identifier: ATI — Samsung GT-S3500i

ttyACM0: Speed 4800: AT — OK

ttyACM0: Speed 9600: AT — OK

ttyACM0: Speed 19200: AT — OK

ttyACM0: Speed 38400: AT — OK

ttyACM0: Speed 57600: AT — OK

ttyACM0: Speed 115200: AT — OK

ttyACM0: Speed 230400: AT — OK

ttyACM0: Speed 460800: AT — OK

ttyACM0: Max speed is 460800; that should be safe.

ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK

Found an USB modem on /dev/ttyACM0.

Modem configuration written to create.

ttyACM0: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

Now when i enter wvdial i got following error from the terminal

[root@localhost ~]# wvdial

–> WvDial: Internet dialer version 1.60

–> Cannot get information for serial port.

–> Initializing modem.

–> Sending: AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”

AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”

OK

–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

–> Modem initialized.

–> Sending: ATDT*99***1#

–> Waiting for carrier.

ATDT*99***1#

CONNECT

–> Carrier detected. Waiting for prompt.

–> Don’t know what to do! Starting pppd and hoping for the best.

–> Starting pppd at Sun Oct 28 18:16:03 2012

–> Pid of pppd: 13344

–> Using interface ppp0

–> pppd: Connect: ppp0 /dev/ttyACM0

–> pppd: LCP: timeout sending Config-Requests

–> pppd: Connection terminated.

–> pppd: Modem hangup

–> Disconnecting at Sun Oct 28 18:16:33 2012

–> The PPP daemon has died: A modem hung up the phone (exit code = 16)

–> man pppd explains pppd error codes in more detail.

–> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.

–> Auto Reconnect will be attempted in 5 seconds

–> Cannot get information for serial port.

–> Initializing modem.

–> Sending: AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”

–> Sending: ATQ0

–> Re-Sending: AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”

–> Modem not responding.

–> Cannot get information for serial port.

–> Initializing modem.

–> Sending: AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”

–> Sending: ATQ0

–> Re-Sending: AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”

–> Modem not responding.

–> Disconnecting at Sun Oct 28 18:17:08 2012

And my wvdial.conf looks like

[Dialer Defaults]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = AT+CGDCONT=1,”IP”,”TATA.DOCOMO.INTERNET”
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = USB Modem
Phone = *99#
Username = SUVANKAR
Password = 1234
Stupid Mode = 1

so I request you,please give a solution in simple language so that i can solve this problem easily.thank you for your time and consideration.